Panel Details
Rib To Rib Distance: 9"
Rib Height: 3/4”
Panel Length: 1' to 51'
Net Coverage: 36" (3FT)
Slope: 1:12 Minimum Roof Slope
Panel FEATURES
Material Type: Standard Galvalume (Zincalume) or Galvanized available for special orders
Available Gauges: 29 Standard, 26 and 24 available for special orders
Fasteners: Exposed Fasteners
Finish: Standard Galvulame Bare or SMP available for special orders
Trim/Flashing: Standard Metroll universal trim/flashing & custom available for special orders in bare and color
Installation Method
General Procedure
1. Refer to trim connection details to determine order of trim and panel placement.
2. Align the edge of the first sheet along the edge of the roof. The panel should hang over a maximum of 2” at the eave and should not extend past the center of the ridge space.
3. After the first panel is properly placed, use the recommended screws to secure the panel.
4. Lay down the next two panels and then check the alignment at the eave and ridge to ensure the panels are square.
Explore Our Extensive Range of Colors
Find Your Perfect Panel Shade!
